Print this page

Equalizing box

Equalizing box

The equalizing box (EB) is intended for connection of group of the load cells to the weight measuring device in composition of the tensometric scales of different function for ensuring of independence of observations from the weight position on the load-receiving device (LRD).

Technical data

Parameter

Value

Amount of the connected load cells

4 with cascading possibility

The circuit of the load cells connection

4 or 6 wire



Range of adjustment of the transmission coefficient of the load cell

To – 1 % from the nominal value of the transmission coefficient of the load cell at output resistance of the load cell 1100 Ohm, to – 3 % from the transmission coefficient of the load cell at output resistance of the load cell 350 Ohm

Control step

0,03 % at output resistance of the load cell 1100 Ohm, 0,1 % at output resistance of the load cell 350 Ohm

Control mode

The additional resistance, powered up in the circuit of the output signal of the load cell

Protection index from the environmental effect

IP 65

Overall dimensions, mm, no more

220х115х55

Mass, kg, no more

0,5

Additional characteristics

Screw or spring clips for connection of the load cells

Functions

 

 

Complete set

Name

Amount, piece

The equalizing box (EB), ready-assembled

1

The hardware – screws M4x15

4

The swing arm for installation of EB

optionally

Customers

Comments

No comments yet

Recommended