The equalizing box (EB) is intended for connection of group of the load cells to the weight measuring device in composition of the tensometric scales of different function for ensuring of independence of observations from the weight position on the load-receiving device (LRD).
Equalizing box
Technical data
|
Parameter |
Value |
|
Amount of the connected load cells |
4 with cascading possibility |
|
The circuit of the load cells connection |
4 or 6 wire |
|
|
To – 1 % from the nominal value of the transmission coefficient of the load cell at output resistance of the load cell 1100 Ohm, to – 3 % from the transmission coefficient of the load cell at output resistance of the load cell 350 Ohm |
|
Control step |
0,03 % at output resistance of the load cell 1100 Ohm, 0,1 % at output resistance of the load cell 350 Ohm |
|
Control mode |
The additional resistance, powered up in the circuit of the output signal of the load cell |
|
Protection index from the environmental effect |
IP 65 |
|
Overall dimensions, mm, no more |
220х115х55 |
|
Mass, kg, no more |
0,5 |
|
Additional characteristics |
Screw or spring clips for connection of the load cells |
Functions
Complete set
|
Name |
Amount, piece |
|
The equalizing box (EB), ready-assembled |
1 |
|
The hardware – screws M4x15 |
4 |
|
The swing arm for installation of EB |
optionally |
Comments
No comments yet