The belt speed sensor (BSS) is intended for measuring of magnitude of the linear displacement of the conveyor belt. The operating principle of BSS consists in transformation of the linear displacement of the conveyor belt to the rotation of the measuring wheel and impulse shaping at each turning movement of the coding disk, linked with it, on a certain angle. Thus, one impulse of BSS is proportional to the linear displacement of the conveyor belt on the magnitude, determined by the diameter of the measuring wheel and number of marks on the coding disk.
Belt speed sensor
Technical data
|
Name |
Value |
|
Supply voltage |
12 … 24 V of direct current |
|
Consumption current (no more) |
40mА |
|
Out type |
OC with the built-in load resistor 2 kiloohm |
|
Выходной ток (не более) |
100 мА |
|
Amount of impulses on 1 complete revolution of the coding disk |
30 |
|
Nominal amount of impulses of BSS on 1 meter of the linear displacement of the belt |
76 |
|
Maximum speed of the linear displacement of the conveyor belt |
5 m/s |
|
Protection index of BSS from the environmental effect |
IР54 |
|
Overall dimensions, mm, no more |
380х240х195 |
|
Mass, kg, no more |
4,5 |
Functions
- measuring of magnitude of the linear displacement of the conveyor belt
Complete set
|
Name |
Amount |
Note |
|
The belt speed sensor with a cable |
1 |
|
|
The passport |
1 |
|
Comments
No comments yet